Knoll-systems HD102 User Manual

Browse online or download User Manual for Projectors Knoll-systems HD102. Knoll Systems HD102 User Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 -

HD102 HDTV DLP Projector Users Manual v1.1

Page 2

10Press the top Keystone button to reduce the upper part of the image, and press the bottom Keystone button to reduce the lower part. Adjust the Con

Page 3

11Connecting a video device You can connect video devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles, HDTV receiver

Page 4

12Plug a white connector into the left audio out connector on the video device and plug a red connector into the right audio out connector on the vid

Page 5 - Connector Panel

13Displaying video Remove the lens cap. Toggle the Power switch on the side of the projector to the On position. The LED flashes green and the fan

Page 6 - Computer connections

14 Adjust the Contrast, Brightness, Color, Tint, or Aspect Ratio in the Picture menu. See page 22 for help with the menus and these adjustments.

Page 7 - Video connections

15Table 1: LED behavior and meaning LED color/behavior Meaning Solid Green The power switch has been toggled on and the software has initialized

Page 10

18 If you still need assistance, visit our website or call us. See the inside of the back cover for support contact information. This product

Page 11 - Video device connections

19Using the remote control The remote uses two (2) provided AAA batteries. They are easily installed by sliding the cover off the remote’s back, alig

Page 12 - DVI connection

2 FCC Warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Page 13 - Displaying video

20Connecting external speakers The projector can be attached to external speakers that have their own power source by plugging a speaker cable (not

Page 14 - Troubleshooting your setup

21• Select a different standard if necessary. See page 23. • Make sure your DVD player is set for a 16:9 television. See your DVD player’s user’s g

Page 15 - LED color/behavior Meaning

22Picture menu To adjust the following settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press S

Page 16

23CCS: (Cross-Color Suppression) processes the signal to remove any color information from the luma portion of the signal. It is On for all composite

Page 17

24Settings menu Audio: allows adjustments to Volume of the internal speaker and allows a chime to play when starting the projector. Adjustments can

Page 18

25Service: To use these features, highlight them and press Select. Factory Reset: restores all settings to their default. Lamp Reset: resets the la

Page 19 - Using the audio

26WARNING: To avoid burns, allow the projector to cool for at least 30 minutes before you replace the lamp. Do not drop the lamp housing or touch t

Page 20 - Optimizing video images

27Appendix 1: HD102 Projection Throw Distance (16:9 Aspect Screen) Screen Diagonal 92" 103" 106" 110" 122.5" 146.75&qu

Page 21 - Using the menus

28LIMITED WARRANTY Knoll Systems, Inc. (“Knoll”) warrants that each HD102 (“the Product”) sold hereunder will conform to and function in accordance

Page 22 - Picture menu

3 TABLE OF CONTENTS Safety Warnings 2 Introduction 5 Positioning the projector 6 Projector and Device Connector Guide 6 Computer connections

Page 23

4 Important Operating Considerations for Safety • Place the projector in a horizontal position no greater than 15 degrees off axis. • Locate th

Page 24 - Settings menu

5Introduction Congratulations and thank you for your excellent choice of a superior digital image projection device. Your new Knoll HD102 projector i

Page 25 - Cleaning the Lens

6 12-volt DC output The 3.5mm mini-jack trigger provides a 12-volt DC output. It provides a constant output while the projector is on. It has numero

Page 26 - Using the security lock

7Video connections The first step for connecting video is deciding what type of output connector you want to connect to the projector. If there is m

Page 27 - Table 3:

8 Video Device Video Compatibility If Your Device Connector is Attached to Adapter or Labeled Connector on projector For Setup Instructions see Com

Page 28 - LIMITED WARRANTY

9Displaying a computer source image Remove the lens cap. Toggle the Power switch on the side of the projector to the On position. The LED flashes g

Comments to this Manuals

No comments