Knoll Systems MVP44a User Manual download pdf (Page 1)

In Canada:

11791 Machrina Way #120

Richmond, B.C. V7A 4V3

Knöll Systems

tel (604) 272-4555

fax (604) 272-5595

Knöll Systems, Richmond, BC & Point Roberts WA

In America:

145 Tyee Drive, #1206

Point Roberts, WA 98281

Four stereo power amplifiers with

individual volume control electronics

and four input source selection

Limited Warranty

Knöll Systems warrants the its electronic products except projectors sold in Canada and the

USA by authorized Knöll dealers to be free from defects in materials and workmanship. This

warranty extends for three full years from the date of purchase by the consumer. Any

products returned freight prepaid to Knöll Systems and found to be defective by Knöll

Systems within the warranty period will be repaired or replaced at Knöll Systems option, at

no charge. Knöll Systems will not be responsible for the actual cost of installation or removal

of the product, nor for any consequential or incidental damages. Some states do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation or

exclusion may not apply to you. This warranty gives you specific legal rights. You may have

additional rights which vary from state to state. Knöll products sold outside of Canada and

the USA may be covered by warranties provided by an authorized Knöll distributor. Please

contact the distributor in the country that the Knöll product was purchased.

Printed in Canada

Version 3.3

INSTALLATION

MANUAL

MVP44a

systems

Specifications

MVP44a 8 Channel Power Amplifier

Inputs: 4 pairs of gold RCA jacks

Input impedance: 24 k ohms

Outputs: Gold 5 way Binding posts

Output power: 50 watts RMS per channel (8 ohms)

Peak output power: 100 watts RMS per channel (8 ohms)

Ideal impedance: 6-8 ohms

Freq. response: 10 Hz - 40 kHz +/- 1 dB (1w)

S/N ratio: over 105 dB A weighted 50 watts

THD distortion: <0.1% 20 Hz to 20 kHz

IMD distortion <0.01% 60 Hz 7 kHz 4:1 (SMPTE)

Trigger control: 12VDC output 60mA max.

Power: 750 watts 117 VAC

Dimensions: 17" x 3.5" x 10.5"

Weight: 22 lbs (10 kg)

Operating Temp: -20C to +60C (-4F to +140F)

Caution: Never listen to sound that is distorted. If distorted sound

is heard, turn the volume down immediately or speaker

and/or amplifier damage could occur that is not covered by the

warranty. If this problem persists, contact your dealer.

Complies with part 15 of the FCC rules. Operation is subject to:

1. This device may not cause harmful interference

2. This device must accept any interference received

including interference that may cause undesired operation.

It is very important to use a top quality

RJ45 8/8 crimper tool. We strongly

suggest using a cat 5 / RJ45 electronic

tester to verify the wire conductors.

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - INSTALLATION

In Canada:11791 Machrina Way #120Richmond, B.C. V7A 4V3Knöll Systemstel (604) 272-4555fax (604) 272-5595Knöll Systems, Richmond, BC & Point Rober

Page 2 - Problem Action

2Congratulations and thank you for choosing the KnöllMVP44a power amplifier. The MVP44a is designed to meetthe amplifier needs of custom installed mul

Page 3 - System layout considerations

System layout considerationsThe MVP44a is the heart of a whole home music system. A MVP44ais designed to work with 1-4 rooms or zones. Up to three MVP

Page 4

...System layout considerations continuedIn certain commercial applications a microphone paging overrideis required. Model MR171 paging and override m

Page 5 - Installation

125Installation It is very important to use a top quality RJ45 8/8 crimper tool. We strongly suggest using a cat 5 / RJ45 electronic tester to v

Page 6 - Programming the 590-00

6117. Install MR60 keypads (or infrared receivers) in the rooms withthe speakers. Cat 3 or cat 5 wire can be home run to the MVP44a orup to three room

Page 7

1078. Connect the emitters to the IR Emitter ports on the rear of theMVP44a. Single or dual emitters can be used. If a Xantech 590-00 isbeing installe

Page 8 - MVP44a Rear Panel

MVP44a Rear PanelAC120V8 ampsA3L+OutputsA3L-B1L-B1L+A3R+A3R-B1R-B1R+12LRSource Inputs34B2L+OutputsB2L-B3L-B3L+B2R+B2R-B3R-B3R+Note 1: Ideal speaker im

Comments to this Manuals

No comments

Knoll Systems MVP44a User Manual Page 1

Browse online or download User Manual for CD players Knoll Systems MVP44a. Knoll Systems MVP44a User's Manual

Summary of Contents

Comments to this Manuals