Kameleon HDP6000 1080p DLP™ Projector Users‟ Manual v1.1
10 Connecting a video device You can connect video devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles, HDTV receivers
11 Computer connections You can connect a computer‟s VGA connector to the VGA input on the projector using a VGA cable. RS-232 connectio
12 Adjust the focus and zoom. If the image is square but not centered adjust focus adjust it using the lens shift dials.
13 Troubleshooting your setup If your image appears correctly on the screen, skip to the next section. If it does not, troubleshoot the setup. T
14 The following tables show common problems. In some cases, more than one possible solution is provided. Try the solutions in the order they are pres
17 Still need assistance? If you need assistance, visit our website at www.knollsystems.com, or call us at 1 800 566 5579. during Pacific
18 Using the keypad buttons Most buttons are described in detail in other sections, but here is an overview of their functions: Power–turns the
19 Optimizing video images Your projector has been factory optimized for very good performance no matter what the source. However, if you wish t
2 FCC Warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC R
20 The menus are grouped by usage: • The Basic Picture menu provides common image adjustments. • The Advanced Picture menu provides more co
21 Advanced Picture menu BrilliantColor™: Produces an expanded onscreen color spectrum that delivers enhanced color saturation for bright, true-
22 Setup menu Language: Allows you to select a language for the onscreen display. Key Click: Turns the key click sound on or off. When this setting i
23 Video Standard: When this feature is set to Auto, the projector attempts to automatically pick the video standard based on the input signal i
24 Help Press Help (on the keypad or remote) at any time to get interactive help for solving common, picture, sound, and cabling problems. NOTE: T
25 WARNINGS • The projector uses a high-pressure mercury glass lamp. The lamp may fail prematurely, or it may rupture with a popping sound if
26 RS-232 terminal specifications Communication configuration To control the projector from and LCD control panel, connect RS-232 cable to the seria
27 Function Command Response Brightness (BRT10) Sets brightness to 10 Power (PWR0) Turns power off Powe
3 TABLE OF CONTENTS Safety Warnings 4 Introduction 5 Positioning the projector 8 Choosing the aspect ratio
31 SplitScreen Compatibility SplitScreen allows two distinct sources to be displayed simultaneously. Switch primary sources, make picture adjus
32 LIMITED WARRANTY Knoll Systems, Inc. (“Knoll”) warrants that each HDP6000 (“the Product”) sold hereunder will conform to and function in accordanc
4 Important Operating Considerations for Safety Refer to this guide for proper startup and shutdown procedures. • Follow all warnings and cautions in
5 Unplug this projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power
6 Power RS232 S-Video HDMI VGA Rear Connector Panel
7 Setting up the Projector There are a number of factors to consider when determining where to set up the projector, including the size and s
8 Projector Positioning The projected image becomes larger as the distance between the unit and screen increases. The manual zoom allows the distanc
9 Choosing the aspect ratio Aspect ratio is the ratio of the image width to image height. HDTV and most DVDs are 16:9, which is the default for
Comments to this Manuals