Knoll Systems Projector HDP6000 User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
24
Help
Press Help (on the keypad or remote) at any time to
get interactive help for solving common, picture, sound,
and cabling problems.
NOTE: The projector can be re-programmed to display a custom (non- interactive) screen
when Help is pressed. To do this: Create your custom screen on a computer and display it on
the projector, then use the Take Snapshot command in the Setup menu. When you see the
Snapshot Successful message, hold down the Help button until the message is removed.
Maintenance
Cleaning
the lens
1 Turn the projector off and unplug the power cord.
2 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
Avoid using an excessive amount of
cleaner, and don‟t apply the cleaner
directly to the lens. Abrasive
cleaners, solvents or other harsh
chemicals might scratch the lens.
3 Lightly wipe the cleaning cloth over the lens in a circular motion.
WARNINGS:
Turn the projector off and unplug
power cord before cleaning any part
of the projector.
Do not open any cover on the
projector, except the lamp cover
or projector top cover.
Do not attempt to service this
product yourself as opening and
removing covers may expose
you to dangerous voltage and
other hazards. Refer all servicing
to qualified service personnel.
Replacing the projection lamp
The lamp hour‟s timer in the Service Info menu counts the number of hours the lamp has been in
use. Twenty hours before the lamp life expires a message appears on the screen at startup
indicating that you should change the lamp. The LED on the top of the projector also blinks red
twice to indicate that the lamp should be changed. Use only a replacement lamp with the same
type and rating as the original lamp. Lamps can be purchased direct from Knoll or the dealer that
sold the projector.
Low cost on-line sales of lamps can be very costly as they sometimes cause a lot of
projector damage when used.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments